Current File : //usr/local/go119/src/runtime/histogram.go
// Copyright 2020 The Go Authors. All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
package runtime
import (
"runtime/internal/atomic"
"runtime/internal/sys"
"unsafe"
)
const (
// For the time histogram type, we use an HDR histogram.
// Values are placed in super-buckets based solely on the most
// significant set bit. Thus, super-buckets are power-of-2 sized.
// Values are then placed into sub-buckets based on the value of
// the next timeHistSubBucketBits most significant bits. Thus,
// sub-buckets are linear within a super-bucket.
//
// Therefore, the number of sub-buckets (timeHistNumSubBuckets)
// defines the error. This error may be computed as
// 1/timeHistNumSubBuckets*100%. For example, for 16 sub-buckets
// per super-bucket the error is approximately 6%.
//
// The number of super-buckets (timeHistNumSuperBuckets), on the
// other hand, defines the range. To reserve room for sub-buckets,
// bit timeHistSubBucketBits is the first bit considered for
// super-buckets, so super-bucket indices are adjusted accordingly.
//
// As an example, consider 45 super-buckets with 16 sub-buckets.
//
// 00110
// ^----
// │ ^
// │ └---- Lowest 4 bits -> sub-bucket 6
// └------- Bit 4 unset -> super-bucket 0
//
// 10110
// ^----
// │ ^
// │ └---- Next 4 bits -> sub-bucket 6
// └------- Bit 4 set -> super-bucket 1
// 100010
// ^----^
// │ ^ └-- Lower bits ignored
// │ └---- Next 4 bits -> sub-bucket 1
// └------- Bit 5 set -> super-bucket 2
//
// Following this pattern, super-bucket 44 will have the bit 47 set. We don't
// have any buckets for higher values, so the highest sub-bucket will
// contain values of 2^48-1 nanoseconds or approx. 3 days. This range is
// more than enough to handle durations produced by the runtime.
timeHistSubBucketBits = 4
timeHistNumSubBuckets = 1 << timeHistSubBucketBits
timeHistNumSuperBuckets = 45
timeHistTotalBuckets = timeHistNumSuperBuckets*timeHistNumSubBuckets + 1
)
// timeHistogram represents a distribution of durations in
// nanoseconds.
//
// The accuracy and range of the histogram is defined by the
// timeHistSubBucketBits and timeHistNumSuperBuckets constants.
//
// It is an HDR histogram with exponentially-distributed
// buckets and linearly distributed sub-buckets.
//
// Counts in the histogram are updated atomically, so it is safe
// for concurrent use. It is also safe to read all the values
// atomically.
type timeHistogram struct {
counts [timeHistNumSuperBuckets * timeHistNumSubBuckets]uint64
// underflow counts all the times we got a negative duration
// sample. Because of how time works on some platforms, it's
// possible to measure negative durations. We could ignore them,
// but we record them anyway because it's better to have some
// signal that it's happening than just missing samples.
underflow uint64
}
// record adds the given duration to the distribution.
//
// Disallow preemptions and stack growths because this function
// may run in sensitive locations.
//
//go:nosplit
func (h *timeHistogram) record(duration int64) {
if duration < 0 {
atomic.Xadd64(&h.underflow, 1)
return
}
// The index of the exponential bucket is just the index
// of the highest set bit adjusted for how many bits we
// use for the subbucket. Note that it's timeHistSubBucketsBits-1
// because we use the 0th bucket to hold values < timeHistNumSubBuckets.
var superBucket, subBucket uint
if duration >= timeHistNumSubBuckets {
// At this point, we know the duration value will always be
// at least timeHistSubBucketsBits long.
superBucket = uint(sys.Len64(uint64(duration))) - timeHistSubBucketBits
if superBucket*timeHistNumSubBuckets >= uint(len(h.counts)) {
// The bucket index we got is larger than what we support, so
// include this count in the highest bucket, which extends to
// infinity.
superBucket = timeHistNumSuperBuckets - 1
subBucket = timeHistNumSubBuckets - 1
} else {
// The linear subbucket index is just the timeHistSubBucketsBits
// bits after the top bit. To extract that value, shift down
// the duration such that we leave the top bit and the next bits
// intact, then extract the index.
subBucket = uint((duration >> (superBucket - 1)) % timeHistNumSubBuckets)
}
} else {
subBucket = uint(duration)
}
atomic.Xadd64(&h.counts[superBucket*timeHistNumSubBuckets+subBucket], 1)
}
const (
fInf = 0x7FF0000000000000
fNegInf = 0xFFF0000000000000
)
func float64Inf() float64 {
inf := uint64(fInf)
return *(*float64)(unsafe.Pointer(&inf))
}
func float64NegInf() float64 {
inf := uint64(fNegInf)
return *(*float64)(unsafe.Pointer(&inf))
}
// timeHistogramMetricsBuckets generates a slice of boundaries for
// the timeHistogram. These boundaries are represented in seconds,
// not nanoseconds like the timeHistogram represents durations.
func timeHistogramMetricsBuckets() []float64 {
b := make([]float64, timeHistTotalBuckets+1)
b[0] = float64NegInf()
// Super-bucket 0 has no bits above timeHistSubBucketBits
// set, so just iterate over each bucket and assign the
// incrementing bucket.
for i := 0; i < timeHistNumSubBuckets; i++ {
bucketNanos := uint64(i)
b[i+1] = float64(bucketNanos) / 1e9
}
// Generate the rest of the super-buckets. It's easier to reason
// about if we cut out the 0'th bucket, so subtract one since
// we just handled that bucket.
for i := 0; i < timeHistNumSuperBuckets-1; i++ {
for j := 0; j < timeHistNumSubBuckets; j++ {
// Set the super-bucket bit.
bucketNanos := uint64(1) << (i + timeHistSubBucketBits)
// Set the sub-bucket bits.
bucketNanos |= uint64(j) << i
// The index for this bucket is going to be the (i+1)'th super bucket
// (note that we're starting from zero, but handled the first super-bucket
// earlier, so we need to compensate), and the j'th sub bucket.
// Add 1 because we left space for -Inf.
bucketIndex := (i+1)*timeHistNumSubBuckets + j + 1
// Convert nanoseconds to seconds via a division.
// These values will all be exactly representable by a float64.
b[bucketIndex] = float64(bucketNanos) / 1e9
}
}
b[len(b)-1] = float64Inf()
return b
}
Mini Shell